Can you cut mountain bike handlebars?

Can you cut down carbon handlebars?

For a CARBON BAR, use a hacksaw with a tungsten carbide blade. Place masking tape over the cut mark and make a mark on top of the masking tape. … Use a lock-on grip as a guide if using a hacksaw to ensure a straight cut. Use smooth strokes for a clean cut using a hacksaw and file any sharp edges.

Are 780mm bars too wide?

The short answer is “yes.” The long answer is, well, kinda long. At six-foot-three-inches tall, an 800mm handlebar allows me to get into a super comfortable and stable position while maintaining a posture that is conducive to both shoulder strength and mobility. A perfect world right there.

How wide is too wide for MTB bars?

In my experience almost no one needs bars wider than 800 mm and the vast majority of riders should be in the 700-725 mm range. Much wider than this and you are probably trying to tap into this same compensation since it is compromising your movement and stability.

Can you change flat handlebars to drop?

Putting drops on a flat bar bike can require new shifters, brake levers, cables, fitting stem, and seems like an awful lot of trouble. Flat bars have advantages of their own, namely increased control of the bike, and have a completely different feel. If getting a second bike is an option, I’d seriously consider that.

THIS IS IMPORTANT:  Quick Answer: Can I put my bike on the train?

Should my bike seat be higher than my handlebars?

Your handlebars should be at least as high as your seat, or even above it, so you can ride upright. If your handlebars are lower than your seat you’ll be pushed into your handlebars, and you’ll place more stress on your wrists, arms, neck, and back.