How often should I service my bike hub?

How often should you service your freehub?

Anyway, as a general rule, I would recommend servicing every 1500 – 2000 miles in ordinary conditions, which would be adequate with the Mavic design. If you get in there and find it clean and adequately lubed, just close it up and go longer.

How many miles do bike hubs last?

Replacement mileage might vary from a few thousand miles to 20,000 miles or more, depending on your road or trail conditions, your weight, how much overall weight your bike is carrying, how aggressively you ride and, most importantly, how much braking you do.

How do I know if my bike hub is worn?

Hub bearings in good condition will feel smooth when you turn the axle because the grease inside is coating the bearings preventing metal-on-metal contact. Worn out or dry bearings will feel rough, metallic and dry.

How do you service a bike hub?

How to Service a Bike Hub

  1. Step 1: Tools Needed. Tools needed. …
  2. Step 2: Remove the Lock Nut. …
  3. Step 3: Remove the Bearings. …
  4. Step 4: Clean the Bearings and Hub. …
  5. Step 5: Apply Grease to the Hub. …
  6. Step 6: Repack the Bearings. …
  7. Step 7: Adjust the Cone and Lock Nut. …
  8. 9 Comments.
THIS IS IMPORTANT:  Are Stealth Electric Bikes legal in Australia?

Do I need to service freehub?

Inside the freehub mechanism will be bearings and a clutch system, usually ratcheting teeth and pawls. The cassette cogs have no moving parts. All moving parts are in the freehub body. … However, if the bearings are worn out and require replacing, it is very likely the entire freehub is needing replacement.

How often should you grease bike bearings?

Most people don’t realize this, but your bike needs maintenance. Your axle bearings needs to be cleaned and repacked with grease every 500 miles (100 on a mountain bike). This instructable shows how to repack your axle bearings and install a new freewheel body (if you need one).

When should I replace my free hub?

Check the freehub for wear to see if it needs replacing or just cleaning and relubing. To do this, firmly grab the splined body and give it a wiggle. If it moves more than a couple of millimetres side to side, replace it.

How long will a freehub last?

I had them last anywhere between two weeks and three months (170 miles per week). Eventually I gave up and bought a Shimano R500 rear wheel for £50 and six months later the freehub is still fine. If you’re degreasing the cassette mounted to the bike, you’re probably washing the grease out of the free hub.