How much does it cost to change fork seals on a motorcycle?

How much does it cost to replace motorcycle fork seals?

If you cannot do it yourself, you should take your bike to a qualified bike mechanic to do it for you. Replacing fork seals can cost between $100-200 depending on how many parts need to be replaced.

How hard is it to change fork seals on a motorcycle?

Fortunately, fork-seal replacement is generally uncomplicated. As always, the task is easier if you get your tools and supplies ready. You’ll need whatever tools are necessary to remove the fork tubes from the bike, plus a hex socket to fit the socket-head bolt securing damping rod or cartridge.

How much is a motorcycle fork service?


Service Price
Replace fork seals/oil (on bike) From $260 + parts
Replace fork seals/oil (loose forks) From $195 + parts
Replace springs & new spacers (loose) From $260 inc parts
Re valve & re spring forks (on bike) From $580 inc parts

How much does a shop charge for fork seals?

Approximate Total Cost: $50 – $200 + 3-6 Hours of work

If your relatively handy and feel up to the task of replacing your own fork seals than this is what you would be looking to spend in both time and parts cost. All prices will depend on what kind of motorcycle and forks you have.

THIS IS IMPORTANT:  What is the range of the Harley Davidson LiveWire?

Can I change fork seals without disassembly?

Yes. Pull the bolt out that secures the cartridge to the lower fork leg and the forks will come apart. Put a seal in with a split type fork seal driver. Then you pull the cap and separate from cartridge to pull the spring to set the fork oil level.

How long should motorcycle fork seals last?

While every two years would be ideal, assuming they have no problems, every three to four years (unless you’re on track or riding an awful lot) should be fine.

Is replacing fork seals hard?

Replacing your fork seals is an easy enough job if you know a few tricks. The first step to any DIY job is to do a little research and get all the parts you’ll need for the job. You’ll at least need the new seals and fork oil but should also consider wipers, bushings and any seals or o-rings for the caps.

How long does it take to replace fork seals?

How long should this take on average? If you have the right tools, and the parts are in good condition, it should take no more than 2 hours. Patience is the key to have a clean fork tube before reinstallation.

Can you change fork oil without removing forks?

You will need to remove the caps to refill the fork tubes with oil. Determine if the fork legs have oil drain plugs near the bottom of the legs. If they do, you are in luck and will be able to change the oil without removing the fork legs.

THIS IS IMPORTANT:  Quick Answer: Why is the front wheel bigger on motorcycle?

What is needed to replace fork seals?

Be sure you have the proper tools and a clean work space before you begin. Specialty suspension tools are readily available online.

  • 47mm ProX fork seal kit.
  • Torque wrench (recommended from a reputable company for accuracy)
  • Socket wrench (3/8 drive)
  • 8mm socket or 8mm T-handle wrench.
  • 10mm socket or 10mm T-handle wrench.