Quick Answer: How do I make my motorcycle shocks softer?

How do I make my rear shocks softer?

The compression adjuster is located on the shock reservoir. When you turn the screw clockwise, you make the damping harder (or slower or heavier). Turn the screw counter-clockwise and the damping will get softer (or faster or lighter). Before you ride your bike, set the compression clicker on a base number.

How do you adjust rear shocks on a motorcycle?

To adjust the preload on your bike’s rear shock, you will need a C-spanner to loosen the top locking ring and spin it up the shock to gain access to the adjuster ring. If you want to increase preload so the spring has less travel and to make the bike feel stiffer, turn the adjuster ring clockwise.

How do you loosen suspension?

How to Soften Car Suspension

  1. Install softer shocks and struts. As the primary component that affects your vehicle’s ride quality, shocks and struts have a very big impact. …
  2. Adjust the shocks to a softer setting, if you have adjustable shocks. …
  3. Install softer springs. …
  4. Replace the bushings in the suspension.

How do you soften front forks?

Though in some cases this is found on the bottom of the fork and the rebound is on the top – check your bike manual. If you wind the screw in towards the ‘H’ (clockwise) the downward action of the fork will harden. Alternatively, if you wind the clicker out (anti clockwise) the fork will soften.

THIS IS IMPORTANT:  What is the best handling Harley Davidson?