Quick Answer: How do I make my motorcycle water wetter?

Is water wetter good for motorcycles?

Street bikes should not use water wetter only, unless they like replacing cooling system components. As it was said before, racing bodies use the water wetter for RACE BIKES because it is not as slippery as anti-freeze.

Can you add water wetter to antifreeze?

Water Wetter is a unique wetting agent for cooling systems which reduces coolant temperatures by as much as 30 degrees Fahrenheit. … Or it can be added to new or used antifreeze to improve the heat transfer of ethylene and propylene glycol systems.

How much water do you use to be wetter?

USE DIRECTIONS

One 12 ounce bottle treats 12-16 quarts of water or a 50% ethylene or propylene glycol solution. In smaller cooling systems, use 4-5 caps per quart.

Which is better water wetter or engine ice?

Distilled H2O and Redline water wetter makes a bike run cooler. Engine Ice is highly overated especially when you live in the Sunbelt. Engine Ice is better when you live in freezing temps.

THIS IS IMPORTANT:  Quick Answer: How far can you ride a motorcycle in a day?

Can I use water instead of coolant in my motorcycle?

Putting just water in your motorcycle’s radiator to cool the engine is definitely not a good idea. Even if you use distilled water, it will eventually damage the engine over time through corrosion. … Using a coolant for your motorcycle raises the boiling point above plain water because of pressure being produced.

What is water wetter in motorcycles?

WaterWetter® is a unique wetting agent for cooling systems which reduces coolant temperatures by as much as 30ºF. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze.

Does water wetter actually work?

Water Wetter does work. I ‘ve used it in a number of older cars, including several Jaguar XKE’s I’ve owned, and it definitely reduces operating temperature. Water Wetter works by reducing the surface tension of the water/coolant mixture. Some basics — water is the most efficient coolant you can use in your engine.

How do you make water wetter?

In situations where water is scarce or it is impractical to wet surfaces daily an additive can be used to achieve, longer lasting results. A surfactant, or surface active agent, makes water more efficient by making water wetter. Water becomes “wetter” by lowering its surface tension.

Can you add too much water wetter?

I can tell you from personal experience that too much water wetter will cause cracks in a plastic reservoir. This and the fact that I really did not see a change in temps would make me tell you to stay away from it. Water Wetter is a great product for its application ( race cars ) .

THIS IS IMPORTANT:  Frequent question: What country has the most motorbikes?

Can you mix engine ice with coolant?

It is never recommended to mix any coolants and Engine Ice is no exception. … After that, for best performance, Engine Ice suggest that you flush the system with a 50/50 mix of water and vinegar, which is a good formula for any coolant flush.

Do cooling system additives work?

But over the years we’ve become accustomed to using cooling system wetting agents, as they’ve been proven to work almost every time. Unlike ring sealers in a can and other mysterious leak sealing products that never seem to work, cooling system additives generally do work.

Is water wetter better than antifreeze?

since water boils at temps lower than your engine could run, thats why you use coolant, to raise the boiling point. Anti-freeze/coolant has absolutely no advantage or benefit over water wetter, other than it prevents freezing.