Quick Answer: What is the load rating on a motorcycle tire?

What does load range B mean on a motorcycle tire?

For example, a tire with a “B” load range means that the tire’s strength is equivalent to a 4-ply construction. This does not mean that the tire has four plies, it just means that it has the same strength as a 4-ply tire. … Contact Dunlop Motorcycle Tires today to get started on an order.

What does load index mean on motorcycle tires?

MOTORCYCLE TIRE LOAD INDEX. This number represents the tire’s load carrying maximum capacity at maximum pressure. The load rating is found after the tire size.

What does 74 h mean on a motorcycle tire?

For example, a tire with the sizing MT90B16 74H has a load index of 74 and a speed rating of H (130 mph). Note: Newer tires that have a width of 150+mm will only use metric sizing. When the alphanumeric system was created, motorcycle tires didn’t get much bigger than an MV85 (150mm).

Is load range B or C better?

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same size but it will not increase the capacity of the trailer.

THIS IS IMPORTANT:  Your question: How often should you charge your motorcycle battery?

What does Load Range C mean?

For example, a “C” load range indicates that a tire is equivalent to a 6-ply construction tire. This tire isn’t actually built with 6 plies, but rather one or two plies of equivalent strength. … Both have a 4-ply rating, but the Extra Load can support additional load at up to 42 PSI while the Standard Load is 36 PSI.

What speed rating is H?

Tires with a maximum speed capability higher than 300 km/h (186 mph), require a “ZR” in the size designation.

Tire Speed Rating Chart.

SPEED SYMBOLS
U 200 124
H 210 130
V 240 149
W 270 168

Can I put a wider tire on my motorcycle rim?

Choosing the Right Tire

Any tire that exceeds the recommended size for your vehicle is considered wide. When you upsize to a wider tire, you need to make sure you are fitting it to a rim within its recommended rim range, so that it will not have an adverse effect on the bike’s overall performance.