What is the best lubricant for motorcycle cables?

Is silicone spray good for motorcycle cables?

A silicone spray will do nicely. Avoid general or multipurpose lubricants or any unrelated oils, like motor oil. Do not use chain lube for your cables. Cleaning and lubricating your throttle cables will help the cables last longer while preventing fraying or snapping.

Which type of grease is used to lubricate cables?

Wire rope lubricants can be petrolatum, asphaltic, grease, petroleum oils or vegetable oil-based (Figure 3). Petrolatum compounds, with the proper additives, provide excellent corrosion and water resistance.

What is white lithium grease good for?

White lithium grease is used to keep components moving smoothly, free of friction and seizing. You can also apply it preventatively to protect against rust and corrosion. White lithium grease can be used to: Lubricate car door hinges.

What is silicone grease made of?

Silicone grease, sometimes called dielectric grease, is a waterproof grease made by combining a silicone oil with a thickener. Most commonly, the silicone oil is polydimethylsiloxane (PDMS) and the thickener is amorphous fumed silica.

How do you maintain a clutch cable?

10 steps to clutch cable inspection and maintenance

  1. Inspect the cable for water leakage, cable fraying and cuts in the cable’s rubber housing. …
  2. Remove the clutch lever pivot bolt. …
  3. Increase the clutch cable slack using the screw adjuster. …
  4. Remove the clutch lever and cable. …
  5. Lube the cable. …
  6. Lube the clutch Lever.
THIS IS IMPORTANT:  Where is the clutch on a motorcycle?

Should wire rope be lubricated?

Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion. Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant.