What should a 12v motorcycle battery read when fully charged?
When a battery charger has been disconnected from the battery for one to two hours, a fully charged Conventional battery should read 12.6 volts (12.8 volts with Sulphate Stop) or higher.
Is 12.4 volts OK motorcycle battery?
12.6V volts or above – Your battery is healthy and fully charged. No further action is required. … 12.1 – 12.4 volts – Your battery is partially discharged and should be recharged as soon as possible, using a suitable battery charger.
How do you know when a motorcycle battery is fully charged?
A fully charged battery should read approximately 12.6VDC. If it reads at or below 12VDC, recharge the battery. Allow battery to rest and test again. A battery that has been fully charged, rested, and tests between 12 and 12.6VDC might start the motorcycle, but it’s not holding a full charge.
How many volts is a Harley Davidson battery?
Harley-Davidson motorcycles use either a 6 volt or a 12 volt battery. Harley-Davidson motorcycles made after the early 1960s are using 12 volt batteries, while older Harleys made before the early 1960s are using a 6 volt battery. If a Harley was made in the last 40 to 50 years, it uses a 12 volt battery.
Does a motorcycle battery charge while idling?
Technically, a motorcycle battery does charge while the motorcycle is idling though it does not provide as much amperage as when the motorcycle is at higher speeds. During a normal ride, a motorcycle provides about 13, 14, or 15 amps while idling only provides less than 1 amp.
How long should I charge a motorcycle battery?
Recharging your motorcycle battery should take 2-3 hours, but may take up to 24 hours. Make sure not to overcharge it, or use a smart charger to be sure.